Bullseye Laser Tracker Tooling Kit – Combo – Standard
Kit includes:
For 1.5″ SMR:
(20) 1.5″ Anodized Aluminum Monuments
(1) Ball Probe Seat 1/8″ Pin – 1″ Offset
(1) Ball Probe Seat 1/4″ Pin – 1″ Offset
(1) Ball Probe Seat 3/8″ Pin – 1″ Offset
(1) Ball Probe Seat 1/2″ Pin – 1″ Offset
(1) Flat Ball Probe Seat – 1″ Offset
(1) Center Punch Seat – 1″ Offset (Includes Punch Rod)
(1) Edge Ball Probe Seat – 1″ Offset
(1) 10″ Remote Point Bar
(1) Sharp Point
(1) Cone
(1) Pole Adapter
Room for: 1.5” SMR’s
Room for additional 1.5” Nests
For 0.5″ SMR:
(20) 0.5″ Anodized Aluminum Monuments
(1) Ball Probe Seat 1/8″ Pin – 1/2″ Offset
(1) Ball Probe Seat 1/4″ Pin – 1/2″ Offset
(1) Ball Probe Seat 3/8″ Pin – 1/2″ Offset
(1) Ball Probe Seat 1/2″ Pin – 1/2″ Offset (Big Body Design)
(1) Flat Ball Probe Seat – 1/2″ Offset (BT-C-Z-BPS-X-x5-Y)
(1) Edge Ball Probe Seat, 1/2″ Offset (BT-C-Z-E-x5-Y)
(1) 1/2″ SMR Magnetic Handle (BT-C-Z-BPH-Y)
Room for 0.5” SMR’s
Room for additional 0.5” Nests
Qty 1: Hard-Sided Case and Foam Insert to Hold all Tooling Items
You may also like…
-
1.5″ SMR – Rhino Series Tough Probe
1.5″ SMR – Rhino Series Tough Probe
-
0.5″ SMR – Rhino Series Tough Probe
0.5″ SMR – Rhino Series Tough Probe